Digital 12V/ 10amp SMPS Battery Charger
Digital 12V/ 10amp SMPS Battery Charger
Product Code : 08
Brand Name : SIYACHI
Price And Quantity
- Minimum Order Quantity
- Unit of Measure
- Other, Electric Equipment, Vacuum Cleaner, Medical Equipment, Wind Generator, Electric Power, Solar System, UPS, Scooter, Motorcycle, Car
- 12 Ampere (amp)
- Rated Capacity
- 160*235*140 Millimeter (mm)
- 1.800 Kilograms (kg)
We are one of trusted firms in this domain, engrossed in manufacturing and supplying quality assured Digital 10 AMP 12 Volt Battery Charger SMPS. This device is well suited to be used for charging batteries of motorcycles, tubular inverter, generator, and UPS. Offered device is known for its fast processing speed and user-friendly operation. In addition, provided Digital 10 AMP 12 Volt Battery Charger SMPS has 1.8kgs weight, length 160mm width 235mm and height 140mm.
- It is a constant current-constant voltage charger
- Low power consumption
- Free from defect
- Length 160mm Width 235mm Height 140mm Weight 1.8kgs
- Charge 1 battery or 10 batteries at a time in PARALLEL . Automatic SMPS battery charger. 12volt 10amp. This charger is useful for charging all types of batteries like Motorcycle, UPS, Tubular, Inverter or Generator batteries.
- This is a Constant Current Constant Voltage charger.
- There is a HIGH/LOW switch at the back. If the switch is set to HIGH (H) battery voltage goes upto 15-15.5volt. If the switch is set to LOW (L) battery voltage goes upto 14-14.5volt.
HOW TO USE:
- Connect battery to charger and switch it on.
- When battery is charged ampere slowly drops.
- Charge for 1 hour more and the battery is ready.
MORE ABOUT SMPS CHARGERS
SIYACHI SMPS Battery Chargers uses new technology in a small box. With R & D facility in Delhi these chargers are designed for charging Batteries. SIYACHI Battery Chargers are of SWITCH-MODE TECHNOLOGY. SIYACHI has battery chargers with output of 12, 24 and 48 volts. SIYACHI battery chargers have a longevity rating of over 6000 power-on-hours. Components commonly found in computers are utilized in these constant current chargers to reduce size and weight. One such component is a sophisticated switching circuit that chops up AC input at a rate of thousands of pulses per second. Since less power is being manipulated at a faster rate, the conversion to 12, 24 & 48 VDC can be completed without the need for a large transformer.
The Switch-mode Charger is an electronic device whereas the transformer type charger is an electrical device with some electronics.
Benefits of Switch-mode Chargers
Smaller size and lightweight: No tapering of current Constant Current. In the transformer type chargers, the current reduces as the battery voltage goes up. For example in a 10 Amps charger, the current will start at 10 Amps and will go down as the battery voltage increase. At the end (full charge) the current is almost zero. So the charger is giving an average of 5 Amps. The switch-mode charger gives a constant current. In charging time, the constant current is equal to almost twice the tapered current. So a 5 Amps Constant Current battery charger is as fast as a tapered 10 Amps transformer type charger. Some conventional chargers are constant current types but they are more expensive, larger in size and weight.
- More Reliable: In switch-mode, the transformers are installed on the electronics circuit board. Since all components are on circuit board, the switch-mode chargers are much more reliable.
- Ability to function with wide AC voltage fluctuations: The switch-mode chargers are capable of large AC voltage fluctuations without any loss of output power.
- Deep discharge start: Can charge a battery as low as 6 volts. Most of transformer type chargers need about 12 volts to start.
- Current Limit: The switch-mode charger will not give large current at low voltage (unlike conventional chargers). This protects the battery.
- Portability: Even if a charger is not installed on-board, it is portable due to small size and lightweight. The user can easily carry it with him to charge the battery.
Key Features :
- Small size & light weight: Portability is a major feature. The charger can be installed on-board.
- Short circuit protection: If you touch the output +ve & -ve wires (with AC ON) and there will be no failure. But it is best to be avoided as it puts stress on electronics.
- Reverse polarity protection: If you connect the battery in reverse, there will be no failure (no fuse will blow).The charger will just not work. When the problem is corrected, the charger will operate normally. But it is best to be avoided as it puts stress on electronics.
- No current drain: If the AC is OFF and the charger is connected to the battery, the drain of current from the battery is very minimal.
- De-sulfation of battery: The charger will remove loose sulfation and increase the battery life.
- Low voltage start: SIYACHI charger will start charging from 6 volts. This means a deep discharged battery can be charged. Transformer type chargers cannot do this.
- Maintain full charge & no overcharging: SIYACHI charger can be left connected to the battery indefinitely without harming (overcharging) the battery.
- SIYACHI SMPS Battery Charger can charge any type of lead acid battery fully Gel, AGM or wet battery.
- Supply Ability
- 100 Per Day
- Delivery Time
- 1 Days
- Sample Policy
- Contact us for information regarding our sample policy
- Main Export Market(s)
- Africa, Asia
- Main Domestic Market
- All India